4
5
WIFI REPEATER
Getting Started
Setting up a Wireless Infrastructure Network
For a typical wireless setup at home ( as shown below), please do
following;
Wireless Repeater Mode
You will need WiFI AP/Router Internet access
Use you mobile phone to check your house route signal coverage,
make sure that the position of your docking station with WiFi-
Repeater can receive your house route signal.
How to configure the Wi-Fi repeater
You can configure the Wi-Fi Repeater by connecting it with your
computer/mobile Phone wirelessly.
Introduction
The WIFI repeater is a combined wireless network connection
device designed specifically for Yard force robot mower
LUV
,
Compact
and
Amiro
. It allows a wireless network to be expanded
using multiple access points without the need for a wired backbone
to link them
.
Package Contents
Before you starting to use this wifi repeater. please check it there
anything missing in the package, and contact your dealer of
purchase to claim for missing items.
1 x Wireless-N Repeater
1 x Quick Installation Guide
NOTE:
The X150i robot mower’s docking station already has
this WIFI repeater installed.
WIFI REPEATER
Installation
To install the WiFi repeater, replace the
charging station's original lid with your new
device.
1.
Gently unhook the two snap-on
connectors of the originallid and slide
it backwards off the charging station.
Keep the original lid, we recommend
storing it in th e WiFi repeater's box.
2.
Align the three ribs in the rear side of
WiFi-Repeater with the corresponding
holes in back of the the docking. Slide
on the WiFi repeater.
3.
Press press the two snap-on
connectors until they hook in position
with an audible "click. Double-check
that the WiFi repeater is securely
fastened.
GB
1. Choose and connect the
WiFi-Repeater from your
mobile phone WiFi list.
