NOTICE: ALWAYS be environmentally
responsible. Follow the guidelines of the
EPA or other governmental agencies for the
proper disposal of hazardous materials
such as lubrication oil, diesel fuel and engine
coolant. Consult the local authorities or
reclamation facility.
1. Remove the oil reservoir from the
bracket (Figure 12, (4)).
0006338
(4)
(1)
(2)
(3)
Figure 12
1 – Bracket
2 – Oil Reservoir Cap
3 – Oil Reservoir
4 – Retaining Strap
2. Empty the contents into a container
large enough to hold the drained gear
oil.
3. Install the oil reservoir (Figure 12, (3))
in the bracket.
4. Place the stern-drive in full trim limit
OUT position.
5. Remove the oil fill / drain plug and
gasket (Figure 13).
6. Drain the oil.
0006030
(2)
(1)
Figure 13
1 – Oil Fill / Drain Plug
2 – Gasket
7. Remove the oil vent plug and gasket
(Figure 14, (1)). Allow the oil to drain
completely.
0006031
(2)
(1)
Figure 14
1 – Oil Vent Plug
2 – Gasket
NOTICE: If any water drains from the oil
fill / drain hole, or if it appears milky, the
stern-drive may be leaking and should
be checked immediately by your
authorized Yanmar Marine dealer or
distributor.
MAINTENANCE
ZT350 Operation Manual
47
© 2008 Yanmar Marine International
