Driving
41
5- Release your hands quickly from the key switch after
start-up of the engine. Both the oil pressure
indicator and the charging indicator will be lit before
start-up, and will go out immediately after start-up.
6- Put the accelerator lever to “Low”, and add no load
within 5 minutes after start-up of the engine. (Be
sure to warm up the engine)
[Precaution]
Do not use continuously for over 10 seconds as
large current is required for starting up the
engine. (If the engine is not started up within 10
seconds, shut down the switch, wait for one
minute, and then repeat the operations in step
4
)
Do not pull the key switch to “Start” during
operation of the engine. Otherwise, the
machine may be damaged.
Starting the engine under cold condition
1- Operate as instructed in steps 1to3 “Starting the engine”.
2- Turn the key switch to “ON”.
3- After the warm-up indicator on the instrument panel
is off, Step the brake pedal to the floor quickly, and
turn the key switch to “Start”.
Stopping the engine
1- Put the accelerator lever to “Low”.
2- The engine will be stopped after the key switch is
turned to “OFF”.
Accelerator lever
Warm-up indicator
https://tractormanualz.com/yanmar/
Содержание AW70V
Страница 29: ...Attachment position of safety labels 28 1 2 3 5 8 9 10 4 6 7 11 12 13 14 https tractormanualz com yanmar ...
Страница 30: ...Attachment position of safety labels 29 https tractormanualz com yanmar ...
Страница 31: ...Attachment position of safety labels 30 1 2 3 4 5 6 7 https tractormanualz com yanmar ...
