Function of parts
33
Operation-related section-2
3
Header clutch lever
The reaping section (header) will start working if the
header clutch lever is pulled to “ON”. The section will
stop working if the threshing clutch over is set to “OFF”.
[Precaution]
Adjust the engine speed to “Low” before operation
of the harvesting clutch lever; and regulate the
speed to normal after the lever is put to “ON”. The
threshing clutch must be engaged before
engagement of the header clutch, and be
disengaged in the reverse order.
4
Threshing clutch lever
Pull the lever to “ON”, and the threshing section will
start working; pull it to “OFF”, and the section will stop
working.
[Precaution]
Adjust the engine speed to “Low” before operation
of the threshing clutch lever; and regulate the
speed to normal after the lever is put to “ON”
5
Reversing lever
The reaping section (header) and the feeding chamber
will give loud noise or the harvesting section will stop
working or otherwise fails if the section and chamber are
blocked by straw during harvesting. In this case, use the
lever to reverse the harvesting section to remove
obstacles
[Note]
Switch the reversing lever after turning off the
header clutch.
Use reversal function by the engine idling
speed.
Threshing clutch lever
Header clutch lever
Reversing lever
On
Off
On
Off
Forward
Reverse
https://tractormanualz.com/yanmar/
Содержание AW70V
Страница 29: ...Attachment position of safety labels 28 1 2 3 5 8 9 10 4 6 7 11 12 13 14 https tractormanualz com yanmar ...
Страница 30: ...Attachment position of safety labels 29 https tractormanualz com yanmar ...
Страница 31: ...Attachment position of safety labels 30 1 2 3 4 5 6 7 https tractormanualz com yanmar ...
