Yanmar 6SY Series, Руководство по эксплуатации

Страница: 48 / 128

BEFORE YOU OPERATE
40
6SY Operation Manual
Adding Engine Oil
1. Remove the oil fill port cap and fill with
engine oil.
2. Fill with oil to the upper limit
(Figure 5, (2)) on the dipstick
(Figure 5, (1)) . Insert the dipstick fully
to check the level.
3. Tighten the fill port cap securely by
hand.
Selection of Marine Gear Oil
Refer to the instruction book for each
marine gear.
ENGINE COOLANT
CAUTION
• NEVER overfill the engine with
engine oil.
• ALWAYS keep the oil level
between upper and lower lines
on the oil cap / dipstick.
0000015en
A
DANGER
SCALD HAZARD!
• NEVER remove the coolant
filler cap if the engine is hot.
Steam and hot engine coolant
will escape and seriously burn
you. Allow the engine to cool
sufficiently before attempting
to remove the filler cap.
• Securely tighten the filler cap
after checking the coolant
level. Steam can escape during
engine operation if the cap is
loose.
• Failure to comply will result in
death or serious injury.
0000002enMarine