BEFORE YOU OPERATE
48
6LY3 Operation Manual
Filling Heat Exchanger with Engine
Coolant
This procedure is for filling the heat
exchanger for the first time or refilling it
after it is flushed. Note that a typical heat
exchanger is shown
.
1. Close the 4 water drain cocks/plugs (2
for engine coolant and 2 for seawater).
Note: The drain cocks are opened
before shipping from the
production plant.
Figure 4
A
DANGER
SCALD HAZARD!
• NEVER remove the fill cap if
the engine is hot. Steam and
hot engine coolant will spurt
out and seriously burn you.
Allow the engine to cool down
before you attempt to remove
the fill cap.
• Securely tighten the fill cap
after you check the heat
exchanger. Steam can spurt
out during engine operation if
the cap is loose.
• ALWAYS check the level of
engine coolant by observing
the reserve tank.
• Failure to comply will result in
death or serious injury.
0000002en6LY3
0002052
2
1
1.
Fresh Water Drain Cock
2.
Seawater Drain Cock
Back
Содержание 6LY3 series
