Yanmar 6LY3 series, Руководство по эксплуатации

Страница: 29 / 136

6LY3 Operation Manual
21
PRODUCT
OVERVIEW
6LY3 Operation Manual
YANMAR 6LY3 FEATURES
AND APPLICATIONS
The engine is equipped with a marine
gear. The marine gear output shaft
connects with the propeller shaft. In order
to obtain full performance from your
engine, it is imperative that you check the
size and structure of the hull and use a
propeller of the appropriate size. As new
boats are used, owners add additional
equipment and completely fill the fuel and
water tanks adding to the overall
displacement (weight) of the vessel. Extra
canvas enclosures, bottom paint, and
bottom fouling can add additional hull
resistance. It is recommended that a new
vessel be propped so the engine can
operate at 100-200 rpm above maximum
rpm to allow for some added weight and
hull resistance. Failure to do so can lead to
reduced vessel performance, lead to
increased smoke levels and cause
permanent damage to your engine.
The engine must be installed correctly with
the seawater or cooling water piping,
exhaust gas piping and electrical wiring.
Any auxiliary equipment attached to the
engine should be easy to use and
accessible for service. To handle the drive
equipment, propulsion systems (including
the propeller) and other onboard
equipment be sure to observe the
instructions and cautions given in the
operation manuals supplied by the
shipyard and equipment manufacturers.
The laws of some countries may require
hull and engine inspections, depending on
the use, size and cruising area of the boat.
The installation, fitting and surveying of
this engine all require specialized
knowledge and engineering skills. See
Yanmar's local subsidiary in your region or
your authorized Yanmar marine dealer or
distributor.
This engine is designed for pleasure boat
applications. The engine is designed to be
operated at: Maximum throttle for less than
5% of its total operation time (30 minutes
out of every 10 hours). The engine should
be operated at cruising speed for less than
90% of its total operation time (9 hours out
of every 10 hours).
Back