Yanmar 6LY3 series, Техническое руководство

Страница: 22 / 87

16 Electronic Control System: Technical Manual for 6LY3 Series
The Troll Calibration Screen allows user to view the current Troll Calibration Points and permits user to enter
new values.
If the control head’s gear is in "Neutral" and Trolling is switched on, the user
can simply change the values and then switch the head into "Gear" and test the
new settings.
If the head in "GEAR" the indicated setting will be outputted to the trolling
control valve. Settings may be changed and the effect can be observed.
To aid in the calibration process the current Percent Load of the Engine is displayed at the top. This value allows
the user to observe the affect of adjusting the SLIP and LOCK UP values is having on propeller loading onto the
engine. At the bottom of the screen is the trolling status as invoked by the control head.
Right Arrow
acts on current menu item. It will change the 3
rd
4th buttons to Plus and Minus keys to
allow incremental 1% changes to the value. The value is sent to the controller for each change.
To calibrate the trolling valves see the complete procedure in the installation book.
Troll Calibration
Troll Max Throttle
This is displayed only if the trolling mode is set for "SPLIT". This speci fi es the maximum percentage
that throttle will reach. The percentage ranges between 10-100. Example: A setting of 70 means that
when the handle is advanced to the WOT position the engine will be at 70% of its maximum normal
Menu Item
Display
choice
Value Function
“Max Throttle:” “10” 0 10 % Min
Thru Increments at 10%
“100” 9 100 % Max
Menu Item
Display
choice
Value Function
“Calibration” - - Enters into Troll Calibration Screen