Operating
Manual
YZ-X9
7
4. Before connecting the battery, please make sure that the electrodes and
terminals are clean. Use electrode cleaning fluid and wire brushes as needed.
Note: Apply a thin layer of non-metallic lubricating oil or protective spray to
the connected wiring to avoid battery corrosion.
5. After the battery is installed, please check the power scale of the battery
power meter. Charge the battery as needed
Black
Red
Cleaning method:
Manually control the water valve to adjust the amount of cleaning fluid (water
and detergent) flowing to the ground. The brush uses a mixture of detergent
and water
A suitable solution to clean the floor. While the machine is moving forward,
suck the sewage on the floor into the sewage tank with a squeegee.
Brush and scouring pad information
To ensure the best performance, please use the correct brush type for cleaning.
Recommended brushes and scouring pads
as follows:
Soft nylon brush (white)－
It is recommended to clean the coated floor without damaging the ground.
Clean without leaving scratches.
Polishing pad (white)-
Used to maintain highly smooth or polished floors.
Cushion pad (red)-
Used to scrub light dirt without hurting the ground.
Gravity discount pad (black)-
Used to forcefully remove heavy coatings or substrates, or for super-powerful
scrubbing.