YANGZI YZ-X1, Руководство по эксплуатации

Страница: 5 / 12

4
The machine USES DC power supply, battery polarity connection error is absolutely not,
once connected with the machine will
Damage to all electrical parts of the machine!
Different specifications, brand batteries have a matching charger, do not use the matching
charger can be
Can damage the battery, and may even cause the battery burst, be sure to pay high
attention to!
The maintenance of the machine must be carried out by special maintenance department
professionals, such as unauthorized maintenance and dismantling of the machine will be
available
Human injury and machine damage can occur.The machine has been debugged before
leaving the factory, and it should be guaranteed after maintenance and disassembly
All fasteners are not loose, the adjustment pieces are adjusted and locked as required.
The electrical components of the machine may be short-circuited in the presence of water
or in a humid environment.Make sure the electrical components are
Dry. Wipe the machine clean after use and leave it in a dry environment.
The charging area should be ventilated. The charger should use a three-core power cord
with a ground wire and a power supply. In order to avoid electric shock accidents to the
maximum extent, please install a leakage circuit breaker.
Don't put anything on the battery!
When cleaning the machine, please do not inject water into the suction motor inlet!
Failure to pay attention to the label on the machine and the contents of the instructions
will result in injury.Be sure to read all the labels on the machine before you operate it.
The machine cannot run on rough ground and slopes, and the operator cannot sit on the
machine.
Avoid contact between hands, feet and loose clothing with rotating parts of the machine.
When the machine is operating on the side, please be careful and slow. Pay attention to
the space between the collision avoidance wheel and the wall, so as to avoid the machine
moving on small obstacles, such as the ground power socket, threshold and the ground
thread.
Use of water or detergent can cause wet surfaces to slip and fall. Place warning labels
around them.
The machine is very heavy, please pay attention to safety in transportation.When handling
the machine, if there is a battery, first remove the battery, and then be sure to move the
metal frame at the bottom of the machine, do not put the force point on the plastic water
tank!!