Yamato UDS-1V-WP, Руководство по эксплуатации

Страница: 37 / 40

35
Display Cause Troubleshooting
The initial error (A)
Turned on the scale while
a heavy item was placed.
Remove the item from the pan, and
then press .
The initial error (B)
Turn on the scale while a
foreign material was stuck
between the main body
and the pan. Check if a foreign material is not stuck
or does not contact the pan. Then
press . When the scale does
not return to normal, contact the
retailer from which the scale was
purchased for troubleshooting.
The initial error (C)
Pressed while a
heavy item was on the
pan in the middle of the
operation.
The weight of the item is beyond the
level where t is operative.
Remove the item from the pan, and
then press .
The initial error (D)
Turned on the scale while
the item was left on a pan.
And then, removed it and
pressed .
Make sure that nothing is left on the
pan and turn on the scale again.
Trouble in electronic circuit
This message appears
when a trouble was
detected in the electronic
circuit. Turn off the scale. And reapply the
power after a brief interval.
When the scale does not return to
normal, contact the retailer from which
the scale is purchased for
troubleshooting.
Trouble in control unit
This message appears
when a strong static
electricity was applied or
any other trouble was
detected in the electronic
circuit. Turn off the scale. And reapply the
power after a brief interval.
When the scale does not return to
normal, contact the retailer from which
the scale was purchased for
troubleshooting.