Yamato PPC-300WP Скачать руководство пользователя

Страница: 26 / 30

YCO-1127-12-08

PPC-300WP

Operation Manual

01 - Function Selection

The PPC-300 series has three user selectable weighing functions: Packing, Checkweighing, and Grad-

ing. The value of this parameter determines which, if any, of the three functions is enabled. For more

information on these functions, please see section IV of this manual.

02 - Number of Grades

The grading function can be set to have 2 to 15 grades. The higher the number of grades, the fewer

the number of different grading setups that can be stored in memory. Please see section IV of this

manual for more information on the grading function.

Setting

002

003

004

005

006

007

008

009

010

011

012

013

014

015

# of grades

# of setups

03 - Buzzer

This parameter only applies to the PPC-300WP.

04 - Grade Stability

The grading function can be set to either show a real time display of the calculated grade, or to show

no grade value until a stable weight reading has been acheived. If this parameter is enabled (001) then

the scale will display two dashes in place of the grade value until the weight reading is stable. Then it

will display the appropriate grade.

05 - Auto-off Timer

The PPC-300 series of scales can be set to automatically turn off after a specified time with no activity.

This feature only operates when the scale is using batteries for power.

06 - Automatic Tare

The packing function can be set to automatically tare an initial stable weight, and to automatically clear

the tare when the scale returns to zero.

07 - Flashing Display

This feature is available for the packing, checkweighing and grading functions. For the packing and

checkweigh functions, this feature can be set to operate as specified in the preceeding table. Any set

ting between 001 and 004 will cause the display in the grading function to flash when any weight above

or equal to the first, lowest grade weight is detected. Setting 005 is only appicable to the PPC-300WP.

21 - Vibration Compensation

Environments that experience "noise" issues caused by external vibration can set this parameter for a

more stable reading at the cost of a longer response time to calculate a stable weight.

22 - Units at Power On

The units (kg, lb, oz, or lb-oz) that the scale will indicate when it is turned on.

V User Parameters

Содержание PPC-300WP































Результаты поиска

Содержание PPC-300WP

Отзывы:

Похожие инструкции для PPC-300WP

Бренды по названию

Популярные бренды

Yamato PPC-300WP, Руководство по эксплуатации

Результаты поиска

Содержание PPC-300WP

Отзывы:

Похожие инструкции для PPC-300WP

Бренды по названию

Популярные бренды