Yamato DP-5601, Руководство по эксплуатации

Страница: 7 / 32

5
How to install the wall mount bracket
Installation procedure
1. First, remove the 4 set screws c on the back
of the indicator. Then install the supplied 2 wall
mount brackets
d
by firmly tightening the 4
screws c (make sure to insert the 4 washers
e between the indicator and the 2 wall mount
brackets d ).
2. Install the 2 wooden tapping screws f to a
wall or post, as shown in the following figure.
105 mm (installation pitch)
3. Using the upper holes of the 2 wall mount
brackets
d
set in the above step 1, hook the
brackets onto the 2 wooden tapping screws f
set in the above step 2. The installation is now
complete.
<Caution>
Since the 4 set screws c have been tightened to a
fixed torque at the factory, the enclosure is
water-proof and dust-proof (i.e. IP66 protection
rating), easy to wash, and hygienically sound
(HACCP compliance). However, for the wall-mount
type indicators, the user must remove the set screws
c and then install the wall mount brackets d .
Therefore, the “IP66” and “HACCP compliance”
cannot be assured if the set screws
c are not firmly
tightened or if the wall mount brackets d are
externally installed.
Wall or post