12
2-1 How to carry out automatic addition
Operating procedure
Panel display
Remarks
c
Press the
key and then the
key.
The
T
sign appears
above
and then
above the “AUTO.”
d
[Addition]
Place an object to be weighed on
the platform of the instrument.
When the reading becomes
stable, automatic addition is
carried out and a short beep
sounds.
*To cancel addition, press the
key.
If the parameter number 035 is set
to any numbers other than “0,”
“SEnd” appears for the preset
seconds.
If the total value has
exceeded the storage
capacity of the internal
memory after addition,
the following error codes
appear.
- The number of
measurement times
has exceeded.
- The total weight has
exceeded.
e
Remove the object from the
platform.
The display returns to
“0.00.”
f
- One cycle of automatic addition is now complete.
- By repeating Steps
d
to
e
, each measurement value is added to the internal memory.
The timing of automatic addition can be set at parameter #69.
2-2 How to return to manual addition
Operating procedure
Panel display
Remarks
c
Press the
key and then the
key.
The
T
sign appears
above
and then the
sign above the “AUTO”
goes out.
Содержание DP-5601
Страница 8: ...6 Display and operation key sections ...
Страница 31: ...29 Desk top Type Separate Stand Type ...