Yamato DP-5601, Руководство по эксплуатации

Страница: 22 / 32

20
How to set user parameters
The DP-5601 has 41 user parameters. You can change their settings according to the environment of use
so as to achieve optimum operation of the instrument. When changing any of them, refer to the user
parameter table on the next page.
<<Example>> To change the parameter No. 007 (non-addition) from 0 to 1:
Operating procedure Panel display Remarks
c Press the
key while
pressing the key.
(The setting value blinks.)
The display switches to
user parameter setting
mode.
d Press the
key until the
parameter number whose setting
you wish to change appears.
Pressing the
key decreases
the parameter number.
(The setting value blinks.)
Keep pressing the key
automatically cycles
through the parameters in
the forward direction. (The
key has the same
function – only goes
backward.)
e
Using the numeric keys, change
the setting.
Press the
key.
(The setting value blinks.)
If you enter the wrong
number, press the
key
to clear the entry and enter
the correct number.
f To set other parameters, repeat
the above Steps d to e .
(The setting value blinks.)
g Press the
key. The display
returns to the weight display.
This example shows no load on
the platform of the instrument.