Yamatake Azbil CMQ-V Series, Руководство пользователя

Страница: 36 / 56

Chapter 5. COMMUNICATION DATA TABLE
28
Item Data range
RAM EEPROM
Remarks
Address R W Address R W
Decimal Decimal
(Hexadecimal) (Hexadecimal)
Flow rate range 0: Standard range 2024
❍ ❍
5024
❍ ❍
setup 1 10 to 99: 10% to 99% of
(07E8) (13A0)
Flow rate range
standard range. (When
2025
❍ ❍
5025
❍ ❍
setup 2
calculating the range
(07E9) (13A1)
reduction, the least sig-
nificant digit is truncated.)
-10 to -99: 10% to 99% of
standard range. (When
calculating the range
reduction, the least sig-
nificant digit is not
truncated.)
Gas type selection 2 0: Conversion factor for 2026
❍ ❍
5026
❍ ❍
* 1
each gas type set by (07EA) (13A2)
the user
1: Air, nitrogen
2: Oxygen
3: Argon
4: Carbon dioxide (CO
2
)
5: Natural gas 13A (LNG)
(Heating value: 46MJ/m
3
)
6: 100% propane
7: 100% methane
8: 100% butane
9: Hydrogen
10: Helium
11: Natural gas 13A (LNG)
(Heating value: 45MJ/m
3
)
SP ramp control 0: Function disabled 2027
❍ ❍
5027
❍ ❍
function 1: SP ramp control 1. (07EB) (13A3)
(In SP ramp-up: ramp 1,
in SP ramp-down: ramp 2)
2: SP ramp control 2.
(In external contact OFF:
ramp 1, in external
contact ON: ramp 2)
Analog scaling 0: Function disabled 2028
❍ ❍
5028
❍ ❍
function 1: Function enabled (07EC) (13A4)
Forced PV 0: Function
disabled 2029
❍ ❍
5029
❍ ❍
(instantaneous 1: Function enabled (07ED) (13A5)
flow rate) zero
function
* 1: The oxygen can not be set for other controllers except those shipped only for the oxygen gas application.
The hydrogen and helium gases can not be set for other controllers not subject to hydrogen and helium
gas applications. Also the controllers subjected to the hydrogen and helium gases can not be set for the
standard gases of Items 1 to 8 and 11 given in the data range.