Yamarin Cross 75, Руководство пользователя

Страница: 17 / 121

17
with water and sink. The bilge pump system does not work in conditions below
0°C.
NOTE! There is always some condensed water in the bilge. The hull bushings may also
allow water to seep through, particularly as the boat ages. Always remember to
check the bilge, via the inspection hatch under the aft seat, before you leave the
boat at quay or buoy and always before setting off. You can empty out any water
through this inspection hatch using a separate tubular drainage pump (optional
accessory). Have any leaks repaired at an authorised repair shop.
WARNING! The boat’s handling properties may become extremely dangerous if there is
water in the bilge.
WARNING! In rough weather, hatches and drawers should be kept shut to prevent them
from filling with water.
7.2. Stability and buoyancy
Please note that stability is reduced by any weight added high up. Any change in the distribution of weight
on board may significantly affect the stability, trim and performance of your craft. Please remember that
large breaking waves always present a serious danger to stability.
-
The amount of water in the bilge must be kept as low as possible.
- The boat’s stability may be impaired during towing, or when passengers are lifting heavy items.
-
This craft will carry its passengers even when filled with water.