Yamarin Cross 64 Bow Rider, Руководство пользователя

Страница: 39 / 49

Yamarin Cross 64 Bow Rider
39 (49)
WARNING! Be careful when handling the hardening agent. If the hardening
agent vessel / bottle leaks, or some agent drops onto a dirty floor
or rag, there is a very high risk of the surface catching fire. Do not
throw into the rubbish bin any rags or vessels containing topcoat /
hardening agent mixture. Always use protective eyewear when
handling topcoat or hardening agent. If you get hardening agent
in your eyes, immediately
rinse with tap water and then consult a
doctor.
NOTE!
Later installations and alterations, if incorrectly carried out, may
damage the structure of the boat or compromise safety. Please
contact the dealer if you are planning any modifications.
NOTE! It is important to use aluminium or stainless steel screws and
rivets when installing accessories. There are ready-made fittings
for a depth finder sensor (Garmin) on the boat’s transom.
NOTE! When installing accessories on an aluminium surface (except in
predetermined locations) , always use aluminium rivets and
insulating washers to avoid corrosion.
7 Winter storage
Preparing your boat for winter storage is an annual routine. Have your boat lifted in good
time before the water freezes. Your boat is not designed for use in ice and it is not meant to
be used in temperatures below zero (for example, the rain water drainage system will freeze
up). It is advisable to perform all maintenance, repair and inspection procedures in
connection with placing the boat in winter storage.
Familiarise yourself with the service procedures shown in the engine manual. We
recommend that you leave them to an authorised service agent. Do not forget to service the
remote control and steering system. Make sure to perform their maintenance according to
their separate instructions and manuals.
7.1 Inspections before winter storage
Have your boat lifted in good time before the water freezes. Your boat is not designed for being
driven in ice, or for remaining in the water when it freezes.
Wash the bottom of the boat immediately after the boat has been lifted. Algae and slime will
come off easier if they are not left to dry.
Give the engine and other equipment their winter servicing, following their separate
manuals. If your boat is stored outside or in a humid place over the winter, empty it of
textiles and other equipment that may corrode or become mouldy in damp conditions. Wash