Yamarin Cross 64 Bow Rider страница 31 Скачать руководство пользователя | Manualshive

Страница: 31 / 49

background image

Yamarin Cross 64 Bow Rider

31 (49)

NOTE!

It is the owner’s / user’s responsibility to make sure that the
boat’s mooring and anchoring equipment is suitable for the boat’s
intended use.

5.10.5

Towing

When towing another boat, use a floating line that is strong enough for the task. Begin
towing slowly, avoid jerks, and do not overload the engine.

The owner of the boat should consider the measures necessary for securing the boat’s
towrope.

If you are towing, or if your boat has to be towed, attach the towline to the bollards as per
the following image.

Image: Attaching the towline to the bollards.

WARNING!

When towing, the towline is under high tension. If it should break,
the end that snaps off may lash back fast enough to cause serious
injury or death. Always use a thick enough line and keep to one
side of the towline.

NOTE!

When towing another boat or being towed, always drive at low
speed. If the boat has a displacement hull, never exceed hull
speed while towing. (The speed before the boat rises to plane).

NOTE!

The towline should always be fastened so that it can be
unfastened under load.

5.10.6

Trailer transport

Weight data for trailer transport may be found in the

technical specifications

. The trailer's

keel supports should carry most of the weight of the boat. Adjust the keel supports so that
the boat cannot slide from side to side. Adjust the side supports so that the boat will not
rock sideways. For more information, please consult your dealer.

«
...
29
30
31
32
33
...
»

Содержание 64 Bow Rider


















































Отзывы:

Нет отзывов

Похожие инструкции для 64 Bow Rider

Бренд: Malibu Kayaks Страницы: 3

2270 CENTER CONSOLE

Бренд: PURSUIT Страницы: 104

Бренд: Axopar Страницы: 44

Бренд: Axopar Страницы: 68

Бренд: Sea-doo Страницы: 180

Бренд: Crivit Страницы: 43

Бренд: Dehler Страницы: 94

Бренд: Gumotex Страницы: 52

Бренд: Hallberg-Rassy Страницы: 130

SUN ODYSSEY 36I

Бренд: Jeanneau Страницы: 120

Бренд: Laser Страницы: 29

Бренд: NorthStar Страницы: 2

Бренд: Feathercraft Страницы: 20

Бренд: HOMCOM Страницы: 3

Бренд: Baja Страницы: 85

Бренд: SailCube Страницы: 9

Бренд: Sea Ray Страницы: 50

Бренд: Sea Ray Страницы: 154

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды