Yamarin Cross 64 Bow Rider, Руководство пользователя

Страница: 33 / 49

Yamarin Cross 64 Bow Rider
33 (49)
NOTE!
If your boat is equipped with a Water skiing bracket (an
accessory), please ensure that the engine will not tilt, with the
engine casing hitting the bracket, during transport.
When letting the boat down from the trailer, remember to fasten the bow rope to the boat
beforehand so that you can release the cable from the trailer hook as soon as the boat is in
the water. Be careful with the winch handle!
5.10.7 Docking
The storage cradle should be sufficiently steady and suitable for this particular boat and
engine combination. A sturdy plank (e.g. a 2x4) should be placed between the V trestles to
support the keel and the bear most of the weight of the boat. The boat must not rest on the
side supports. The side supports should not be placed touching the bottom chine, and point
loads should be avoided. The supporting structures should be strong, particularly near the
transom, to support the added weight of the engine. Storage cradle dimensions are shown in
the picture below.
Image: Storage cradle dimensions.
Only use reputable lifting companies or boat yards with sufficient lifting capacity. In addition
to the boat’s tare weight (please refer to the technical specification), also take into
consideration accessories and other possible loads in the boat.