background image

2

Read Instructions – All the safety and operating
instructions should be read before the unit is operated.

2

Retain Instructions – The safety and operating instructions
should be retained for future reference.

3

Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.

4

Follow Instructions – All operating and other instructions
should be followed.

5

Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.

6

Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.

6A

A unit and cart combination should
be moved with care. Quick stops,
excessive force, and uneven
surfaces may cause the unit and 
cart combination to overturn.

7

Wall or Ceiling Mounting – The unit
should be mounted to a wall or ceiling only as
recommended by the manufacturer.

8

Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation.  For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.

9

Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.

10

Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.

11

Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.

12

Cleaning – The unit should be cleaned only as
recommended by the manufacturer.

13

Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.

14

Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.

15

Damage Requiring Service – The unit should be serviced
by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged;
or

B.

Objects have fallen, or liquid has been spilled into the unit;
or

C.

The unit has been exposed to rain; or

D.

The unit does not appear to operate normally or exhibits a
marked change in performance; or

E.

The unit has been dropped, or the cabinet damaged.

16

Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions.  All other servicing should be referred to
qualified service personnel.

17

Power Lines – An outdoor antenna should be located
away from power lines.

18

Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

SAFETY INSTRUCTIONS

1

To assure the finest performance, please read this manual
carefully.  Keep it in a safe place for future reference.

2

Install this unit in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold.  Avoid sources of humming
(transformers, motors).  To prevent fire or electrical shock,
do not expose the unit to rain or water.

3

Never open the cabinet.  If something drops into the set,
contact your dealer.

4

Do not use force on switches, controls or connection
wires.  When moving the unit, first disconnect the power
plug and the wires connected to other equipment. Never
pull the wire itself.

5

Do not attempt to clean the unit with chemical solvents;
this might damage the finish.  Use a clean, dry cloth.

6

Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding that
the unit is faulty.

7

When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.

8

To prevent lightning damage, disconnect the AC power
plug when there is an electrical storm.

9

Since this unit has a built-in power amplifier, heat will
radiate from the rear panel.  Therefore, place the unit apart
from the walls, allowing a space of at least 10 cm (3-
15/16”) above, behind and on the both sides of the unit.
Also, do not position with the rear panel facing down on
the floor or other surface.

10

Super-bass frequencies reproduced by this unit may
cause a turntable to generate a howling sound. In such a
case, move this unit away from the turntable.

11

This unit features a magnetically shielded design, but
there is still a chance that placing it too close to a TV set
might impair picture color.  Should this happen, move this
unit away from the TV set.

12

If you hear distortion (i.e., unnatural, intermittent “rapping”
or “hammering” sounds) coming from this unit, reduce the
volume level. Extremely loud playing of a movie
soundtrack’s low frequency, bass-heavy sounds or
similarly loud popular music passages can damage this
speaker system.

Содержание YST-SW150/80













Отзывы: