6-3
Storage
7.
Pull the lower part of the left side cover toward you,
and then detach the upper projections from the
rubber grommets of the body by pulling down the
left side cover.
8.
Remove the bolts, and remove the fuel cock
bracket from the chassis.
9.
Place a suitable container below the fuel cock to
collect the drained gasoline. Remove the ring nut
of the fuel cock, and then remove the fuel strainer
cup.
TIP
If the ring nut is too tight, loosen it using a wrench or
other tool.
10.
Turn the fuel cock lever from the “STOP” position to
the “RUN” position, and drain the remaining gaso-
line out of the fuel tank.
1
2
2
1
1. Left side cover
2. Projection
2
1
1. Bolt
2. Fuel cock bracket
1
2
3
1. Ring nut
2. Fuel strainer cup
3. Container
1
2
3
1. Fuel cock lever
2. “RUN”
3. “STOP”
7XE-28199-U6-E0.book 3 ページ ２０２０年５月１日 金曜日 午後３時４３分