Yamaha YP250R 2005, Руководство по обслуживанию

Страница: 42 / 370

2 - 22
SPEC
TIGHTENING TORQUES
NOTE:
1. Tighten the lower ring nut 38 Nm (3.8 m · kg, 27 ft · lb) with a torque wrench and the steering nut
wrench, and then loosen the nut 1/4 turn.
2. Tighten the lower ring nut 22 Nm (2.2 m · kg, 16 ft · lb) with a torque wrench and the steering nut
wrench.
3. Install the rubber washer and the center ring nut.
4. Finger tighten the center ring nut, align the slots of both ring nuts, and then install the lock
washer.
5. Hold the lower and center ring nuts, and then tighten the upper ring nut 75 Nm (7.5 m · kg, 54 ft · lb)
with a torque wrench and the steering nut wrench.
Rear brake master cylinder and holder M6 7 0.7 5.1
Rear brake master cylinder and brake lever M6 10 1.0 7.2
Grip end M16 26 2.6 19
Front cowling inner panel and frame M6 7 0.7 5.1
Radiator cover and frame M6 7 0.7 5.1
Rear side cover (left and right) and frame M6 7 0.7 5.1
Mudguard and frame M6 7 0.7 5.1
Footrest board and frame M6 7 0.7 5.1
Storage compartment and frame M6 7 0.7 5.1
Item Thread size
Tightening torque
Remarks
Nm m · kg ft · lb