Yamaha YFM700RV 2006, Руководство по обслуживанию

Страница: 399 / 409

8 - 45
– +
ELEC
COOLING SYSTEM
YES
NO
EBS01089
6. Circuit breaker (fan motor)
• Remove the circuit breaker from the wire
harness.
NOTE:
The circuit breaker
1
is attached to the wire
harness with white tape near the headlight
relay
2
.
• Connect the pocket tester (
Ω ×
1) to the
circuit breaker.
Circuit breaker resistance
Zero
Ω
at 20 °C (68 °F)
Replace the circuit
breaker.
2
1
7. Coolant temperature sensor
• Remove the coolant temperature sensor
from the cylinder head.
• Connect the pocket tester (
Ω ×
10) to the
coolant temperature sensor
1
as shown.
• Immerse the coolant temperature sensor
in a container filled with coolant
2
.
NOTE:
_
Make sure the coolant temperature sensor
terminals do not get wet.
• Place a thermometer 3 in the coolant.
• Slowly heat the coolant, and then let it cool
to the specified temperature indicated in
the table.
• Check the coolant temperature sensor for
continuity at the temperatures indicated in
the table.
Test
step Coolant
temperature
Resistance
1 20 °C (68 °F) 2.32 ~ 2.59 k
Ω
2 80 °C (176 °F) 0.310 ~ 0.326 k
Ω
3 110 °C (230 °F) 0.140 ~ 0.144 k
Ω
WARNING
_
• Handle the coolant temperature sensor
with special care.
• Never subject the coolant temperature
sensor to strong shocks. If the coolant
temperature sensor is dropped, replace
it.
T
R
.
.
Coolant temperature sensor
18 Nm (1.8 m · kg, 13 ft · lb)