5-16
5
TIP
The spring preload setting is determined by
measuring distance A, shown in the illustration.
The shorter distance A is, the greater the spring
preload. The longer distance A is, the lesser the
spring preload.
Each complete turn of the adjusting nut chang-
es distance A by 1.5 mm (0.06 in).
3. Tighten the locknut to the specified torque.
NOTICE:
Always tighten the locknut
against the adjusting nut, and then tighten
it to the specified torque.
[ECB00082]
Rebound damping force
Turn the rebound damping force adjusting screw
in direction (a) to increase the rebound damping
force. Turn in direction (b) to decrease the re-
bound damping force.
Spring preload setting:
Minimum (soft):
Distance A = 268.0 mm (10.55 in)
Standard:
Distance A = 262.0 mm (10.31 in)
Maximum (hard):
Distance A = 253.0 mm (9.96 in)
1. Distance A
Tightening torque:
Locknut:
42 N·m (4.2 kgf·m, 31 lb·ft)
1
UBCX60E0.book Page 16 Friday, April 19, 2019 9:09 AM
