9-21
9
4. Remove the radiator cap.
5. Remove the coolant reservoir cap.
6. Disconnect the coolant reservoir hose on the
coolant reservoir side, and then drain the
coolant from the coolant reservoir.
7. After draining the coolant, thoroughly flush
the cooling system with clean tap water.
8. Install the coolant drain bolt and its new gas-
ket, and then tighten the bolt to the specified
torque.
1. Coolant drain bolt
2. Gasket
1. Radiator cap
1
2
1
1. Coolant reservoir cap
2. Coolant reservoir hose
Tightening torque:
Coolant drain bolt:
11 N·m (1.1 kgf·m, 8.1 lb·ft)
1
2
UBCX60E0.book Page 21 Friday, April 19, 2019 9:09 AM