Yamaha YFM700R Скачать руководство пользователя

Страница: 136 / 156

9-49

NOTICE

ECB00933

To charge a VRLA (valve-regulated lead-acid)
battery, a special battery charger is required.
Using a conventional battery charger will dam-
age the battery.

To store the battery



If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.



If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.

NOTICE

ECB00942



Always keep the battery charged. Storing the
battery in a discharged state for an extended
period of time will cause permanent battery
damage.



Do not store the battery in an excessively
cold or warm place [below freezing or above
30 °C (90 °F)].

To install the battery

1. Place the battery in its compartment.

2. Connect the positive battery lead first, then

connect the negative battery lead by installing
their bolt.

NOTICE:

When installing the bat-

tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.

[ECB01111]

3. Hook the battery holding plate onto the bat-

tery box.

1. Positive battery lead (red)
2. Negative battery lead (black)

UBCX60E0.book Page 49 Friday, April 19, 2019 9:09 AM

Содержание YFM700R





























































































































































Результаты поиска

Содержание YFM700R

Отзывы:

Похожие инструкции для YFM700R

Бренды по названию

Популярные бренды

Yamaha YFM700R, Руководство пользователя

Результаты поиска

Содержание YFM700R

Отзывы:

Похожие инструкции для YFM700R

Бренды по названию

Популярные бренды