Yamaha YDP-121, Руководство пользователя

Страница: 28 / 40

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 28
YDP-121
Factory Preset Recall
Options
BC-8 Bench
A comfortable bench styled to match your Yamaha
YDP-121.
HPE-160 Stereo Headphones
High-performance lightweight dynamic headphones
with extra-soft ear pads.
All dual mode, reverb, touch sensitivity, tuning settings, and the
settings affected by the Backup Functions can be restored to their
original factory preset values by holding the C7 key (rightmost key on
the keyboard) while turning the [POWER] switch ON. This also erases
all recorder data, and sets all Backup on/off settings (F7) to “OFF”.
NOTE
• The factory setting list is found on page 29.
Troubleshooting
If you encounter what appears to be a malfunction, please check the following points before assuming
that your YDP-121 is faulty.
1. No Sound When the Power is Turned ON
Is the AC plug properly connected to the YDP-121
and an AC wall outlet? Check the AC connection
carefully. Is the MASTER VOLUME control turned
up to a reasonable listening level?
Also make sure that a pair of headphones is not
plugged into the PHONES jack.
2. The Damper Pedal Doesn’t Work
If the damper pedal doesn’t work, or notes are
sustained even when the pedal is not pressed, make
sure that the pedal cord is properly plugged into the
main unit (page 32).
3. The YDP-121 Reproduces Radio or TV Sound
This can occur if there is a high-power transmitter in
your vicinity. Contact your Yamaha dealer.
4. Intermittent Static Noise
This is usually due to turning ON or OFF a house-
hold appliance or other electronic equipment which
is fed by the same AC mains line as your YDP-121.
5. Interference Appears On Radio or TV Sets
Located Near the YDP-121
The YDP-121 contains digital circuitry which can
generate radio-frequency noise. The solution is to
move the YDP-121 further away from the affected
equipment, or vice versa.
6. Noise is heard from the speakers or head-
phones.
The noise may be due to interference caused by the
use of a mobile phone in close proximity to the
YDP-121.
Turn off the mobile phone, or use it further away
from the YDP-121.
●
If “
Scn
” appears on the display an internal malfunction has occurred. In this case, contact your
Yamaha dealer.
POWER
26