Yamaha YBR125ED Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 90

background image

4-6

Proper loading of your motorcycle is important for the

handling, braking, and other performance and safety

characteristics of your motorcyle. Do not carry loosely

packed items that can shift. Securely pack your

heaviest items close to the center of the motorcycle,

and distribute the weight evenly from side to side.

Properly adjust the suspension for your load, and

check the condition and pressure of your tires. NEVER

OVERLOAD YOUR MOTORCYCLE. Make sure the total

weight of the cargo, rider, passenger, and accessories

(fairing, saddlebags, etc. if approved for this model)

does not exceed the maximum load of the motorcycle.

Operation of an overloaded motorcycle could cause

tire damage, an accident, or even injury.

2.

Tire inspection
Always check the tires before operating the motorcycle.
If a tire tread shows crosswise lines (minimum tread
depth), if the tire has a nail or glass fragments in it, or
if the side wall is cracked, contact a Yamaha dealer or
other qualified mechanic and have the tire replaced.

1. Tread depth

2. Side wall 3. wear indicator

WARNING:

4-6

Proper loading of your motorcycle is important for the

handling, braking, and other performance and safety

characteristics of your motorcyle. Do not carry loosely

packed items that can shift. Securely pack your

heaviest items close to the center of the motorcycle,

and distribute the weight evenly from side to side.

Properly adjust the suspension for your load, and

check the condition and pressure of your tires. NEVER

OVERLOAD YOUR MOTORCYCLE. Make sure the total

weight of the cargo, rider, passenger, and accessories

(fairing, saddlebags, etc. if approved for this model)

does not exceed the maximum load of the motorcycle.

Operation of an overloaded motorcycle could cause

tire damage, an accident, or even injury.

2.

Tire inspection
Always check the tires before operating the motorcycle.
If a tire tread shows crosswise lines (minimum tread
depth), if the tire has a nail or glass fragments in it, or
if the side wall is cracked, contact a Yamaha dealer or
other qualified mechanic and have the tire replaced.

1. Tread depth

2. Side wall 3. wear indicator

WARNING:

«
...
33
34
35
36
37
...
»

Содержание YBR125ED



























































































Отзывы:

Нет отзывов

Похожие инструкции для YBR125ED

Бренд: B-PWR Страницы: 12

Бренд: hepco & becker Страницы: 5

Бренд: Honda Страницы: 91

Бренд: Sym Страницы: 31

Бренд: X-lite Страницы: 96

Бренд: R&G Страницы: 2

Scorpion Exo-T520

Бренд: Dennis Kirk Страницы: 10

Бренд: SHOEI Страницы: 38

Бренд: Memphis Shades Страницы: 2

Бренд: Mallory Страницы: 3

Бренд: X-lite Страницы: 38

Бренд: Sachs Bikes Страницы: 84

Бренд: hepco & becker Страницы: 2

Бренд: DYNATEK Страницы: 12

Бренд: rizoma Страницы: 10

Бренд: rizoma Страницы: 16

Бренд: Oxford Страницы: 28

Бренд: LSL Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды