manualshive.com logo in svg

Yamaha YBR125ED, Руководство пользователя, Страница: 15 / 90

Поделиться
Скачать
Yamaha YBR125ED Скачать руководство пользователя страница 15

3-1

CONTROL FUNCTIONS

Main switch
The main switch controls the ignition and the electrical
system. It’s operation is described below.

ON:

Electrical circuits are switched on. Engine can be started.
The key cannot be removed.

OFF:

All electrical circuits are switched off. The key can be
removed.

LOCK:

The steering is locked and all electrical circuits are switched
off. The key can be removed. Refer to page (3-11) “Steering
lock” for instructions.

NOTE:

Always turn the main switch to “OFF” or “LOCK” and remove
the key when the motorcycle is unattended.

LOCK

3-1

CONTROL FUNCTIONS

Main switch
The main switch controls the ignition and the electrical
system. It’s operation is described below.

ON:

Electrical circuits are switched on. Engine can be started.
The key cannot be removed.

OFF:

All electrical circuits are switched off. The key can be
removed.

LOCK:

The steering is locked and all electrical circuits are switched
off. The key can be removed. Refer to page (3-11) “Steering
lock” for instructions.

NOTE:

Always turn the main switch to “OFF” or “LOCK” and remove
the key when the motorcycle is unattended.

LOCK

Содержание YBR125ED



























































































Отзывы:

Нет отзывов