Yamaha YBR125ED Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 90

background image

6-23

Drive chain lubrication
The chain consists of many parts which work with each
other. If the chain is not maintained properly, it will wear out
quickly. Therefore, the chain must be serviced regularly.
This service is especially necessary when riding in dusty
areas.

1.

Use Yamaha Chain and Cable Lube or any
brands of spray-type chain lubricant. First,
remove all dirt and mud from the chain with a
brush or cloth, then spray lubricant between both
rows of side plates and on all center rollers. The
chain should be lubricated every 500 km (300 mi).

2.

To clean the chain, remove it from the machine,
dip it in solvent, and clean out as much dirt as
possible. Take the chain out of the solvent and
dry it. Immediately lubricate the chain to prevent
it from rusting.

Cable inspection and lubrication

Damage to the outer housing of cables may allow
internal rusting and cause interfere with cable
movement. Replace damaged cables as soon as
possible to prevent unsafe conditions.

Lubricate the inner cable and the cable end. If it does not
operate smoothly, ask a Yamaha dealer to replace them.

RECOMMENDED LUBRICANT:

Engine oil SAE 20W50

WARNING:

6-23

Drive chain lubrication
The chain consists of many parts which work with each
other. If the chain is not maintained properly, it will wear out
quickly. Therefore, the chain must be serviced regularly.
This service is especially necessary when riding in dusty
areas.

1.

Use Yamaha Chain and Cable Lube or any
brands of spray-type chain lubricant. First,
remove all dirt and mud from the chain with a
brush or cloth, then spray lubricant between both
rows of side plates and on all center rollers. The
chain should be lubricated every 500 km (300 mi).

2.

To clean the chain, remove it from the machine,
dip it in solvent, and clean out as much dirt as
possible. Take the chain out of the solvent and
dry it. Immediately lubricate the chain to prevent
it from rusting.

Cable inspection and lubrication

Damage to the outer housing of cables may allow
internal rusting and cause interfere with cable
movement. Replace damaged cables as soon as
possible to prevent unsafe conditions.

Lubricate the inner cable and the cable end. If it does not
operate smoothly, ask a Yamaha dealer to replace them.

RECOMMENDED LUBRICANT:

Engine oil SAE 20W50

WARNING:

«
...
66
67
68
69
70
...
»

Содержание YBR125ED



























































































Отзывы:

Нет отзывов

Похожие инструкции для YBR125ED

Бренд: Can-Am Страницы: 16

Бренд: Can-Am Страницы: 254

Бренд: KTM Power Parts Страницы: 7

Бренд: hepco & becker Страницы: 5

Бренд: hepco & becker Страницы: 3

Бренд: MRA Страницы: 9

Бренд: R&G Страницы: 18

Бренд: Honda Страницы: 60

Бренд: SCA Страницы: 5

Бренд: Honda Страницы: 140

WOLVERINE R MAX 2021

Бренд: Yamaha Страницы: 190

Бренд: Yamaha Страницы: 194

WOLVERINE RMAX2 2024

Бренд: Yamaha Страницы: 196

Vstar XVS650T 2004

Бренд: Yamaha Страницы: 101

Бренд: Yamaha Страницы: 112

Aquila GT250 R Ej

Бренд: HYOSUNG Страницы: 37

Бренд: hepco & becker Страницы: 4

Бренд: HJC Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды