manualshive.com logo in svg

Yamaha YBR 125K, Руководство пользователя

Поделиться
Скачать
Yamaha YBR 125K Скачать руководство пользователя страница 67

Storage the battery

1. When the motorcycle is not used for a month or longer,

remove the battery and store it in a cool, dark place.
Completely recharge the battery before reinstallation.

2. If the baterry needs to be stored for a longer period

than the period mentioned above, check the specific
gravity at least once a month, and recharge it when the
specific gravity is below normal.

3. Always make sure the connections are correct when

reinstalling the battery. The red (positive) lead is for the
+ terminal and the black (negative) lead is for the -
terminal. Always connect the red (positive) lead first,
then connect the black (negative) lead. Make sure that
the battery breather pipe is correctly routed, free of
obstructions, and in good condition.

6-27

If a fuse is blown, turn off the ignition switch and the switch
of the circuit in question. Install a new fuse of proper
amperage. Turn on the switches and see if the electrical
device operates. If the fuse immediately blows again,
consult a Yamaha dealer.

      WARNING:

Do not use fuses of higher amperage rating than those
recommended. Substitution of a fuse of improper rating
can cause extensive electrical system damage and
possibly a fire.

     FUSE CAPACITY:10 A

Fuse replacement

1. Fuse

2. Reserve

CAUTION:

Storage the battery

1. When the motorcycle is not used for a month or longer,

remove the battery and store it in a cool, dark place.
Completely recharge the battery before reinstallation.

2. If the baterry needs to be stored for a longer period

than the period mentioned above, check the specific
gravity at least once a month, and recharge it when the
specific gravity is below normal.

3. Always make sure the connections are correct when

reinstalling the battery. The red (positive) lead is for the
+ terminal and the black (negative) lead is for the -
terminal. Always connect the red (positive) lead first,
then connect the black (negative) lead. Make sure that
the battery breather pipe is correctly routed, free of
obstructions, and in good condition.

6-27

If a fuse is blown, turn off the ignition switch and the switch
of the circuit in question. Install a new fuse of proper
amperage. Turn on the switches and see if the electrical
device operates. If the fuse immediately blows again,
consult a Yamaha dealer.

      WARNING:

Do not use fuses of higher amperage rating than those
recommended. Substitution of a fuse of improper rating
can cause extensive electrical system damage and
possibly a fire.

     FUSE CAPACITY:10 A

Fuse replacement

1. Fuse

2. Reserve

CAUTION:

Содержание YBR 125K




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды