Yamaha YBR 125K Скачать руководство пользователя

Страница: 40 / 83

5-5

2. 150 ~ 500 Km:

Avoid prolonged operation above 1/2 throttle. Allow the

machine to rev freely through the gears, but do not use

full throttle at any time.

3. 500 ~ 1,000 Km:

Avoid cruising speeds in excess of 3/4 throttle.

After 1,000Km of operation, be sure to replace the engine

oil.

4. After 1,000 Km:

Avoid prolonged full throttle operation. Vary speeds

occasionally.

If any engine trouble should occur during the break-in

period, consult a Yamaha dealer immediately.

Parking

When parking the motorcycle, stop the engine and remove

the ignition key. Turn the fuel cock to ìOFFî whenever

stopping the engine.

The muffler and exhaust pipe are hot. Park the

motorcycle in a place where pedestrians or children

are not likely to touch the motorcycle. Do not park the

motorcycle on a slope or soft ground; the motorcycle

may fall over.

CAUTION:

WARNING:

5-5

2. 150 ~ 500 Km:

Avoid prolonged operation above 1/2 throttle. Allow the

machine to rev freely through the gears, but do not use

full throttle at any time.

3. 500 ~ 1,000 Km:

Avoid cruising speeds in excess of 3/4 throttle.

After 1,000Km of operation, be sure to replace the engine

oil.

4. After 1,000 Km:

Avoid prolonged full throttle operation. Vary speeds

occasionally.

If any engine trouble should occur during the break-in

period, consult a Yamaha dealer immediately.

Parking

When parking the motorcycle, stop the engine and remove

the ignition key. Turn the fuel cock to ìOFFî whenever

stopping the engine.

The muffler and exhaust pipe are hot. Park the

motorcycle in a place where pedestrians or children

are not likely to touch the motorcycle. Do not park the

motorcycle on a slope or soft ground; the motorcycle

may fall over.

CAUTION:

WARNING:

Содержание YBR 125K




















































































Результаты поиска

Содержание YBR 125K

Отзывы:

Похожие инструкции для YBR 125K

Бренды по названию

Популярные бренды

Yamaha YBR 125K, Руководство пользователя

Результаты поиска

Содержание YBR 125K

Отзывы:

Похожие инструкции для YBR 125K

Бренды по названию

Популярные бренды