manualshive.com logo in svg

Yamaha YBR 125K, Руководство пользователя

Поделиться
Скачать
Yamaha YBR 125K Скачать руководство пользователя страница 23

Fuel cock

3-9

The fuel cock supplies fuel from the tank to the carburetor

while filtering it also.
The fuel cock has three positions:

OFF:

With the fuel cock in this position, fuel will not flow.
Always set the fuel cock to this position when the

engine is not running.

ON:

With the fuel cock in this position, fuel flows to the

carburetor. Set the fuel cock to this position when

starting the engine and while riding.

RES: This indicates reserve. If you run out of fuel while

riding, set the fuel cock to this position.

Fill the tank at the first opportunity. be sure to set

fuel cock back to ìONî after refueling!

Fuel cock

3-9

The fuel cock supplies fuel from the tank to the carburetor

while filtering it also.
The fuel cock has three positions:

OFF:

With the fuel cock in this position, fuel will not flow.
Always set the fuel cock to this position when the

engine is not running.

ON:

With the fuel cock in this position, fuel flows to the

carburetor. Set the fuel cock to this position when

starting the engine and while riding.

RES: This indicates reserve. If you run out of fuel while

riding, set the fuel cock to this position.

Fill the tank at the first opportunity. be sure to set

fuel cock back to ìONî after refueling!

Содержание YBR 125K




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды