manualshive.com logo in svg

Yamaha YBR 125K, Руководство пользователя

Поделиться
Скачать
Yamaha YBR 125K Скачать руководство пользователя страница 52

Valve clearance adjustment

The correct valve clearance changes with use, resulting in
improper fuel/air supply or engine noise. To prevent this,
valve clearance must be adjusted regularly. This adjustment,
however, should be left to a professional Yamaha service
technician.

Carburetor adjustment

The carburetor is a vital part of the engine. Adjusting should
be left to a Yamaha dealer who has the professional
knowledge, specialized data, and equipment to do so
properly. However, the following may be serviced by the
owner as part of routine maintenance.

The carburetor was set at Yamaha factory after many

tests. If the settings are changed, poor engine
performance and damage may result.

6-12

CAUTION:

Valve clearance adjustment

The correct valve clearance changes with use, resulting in
improper fuel/air supply or engine noise. To prevent this,
valve clearance must be adjusted regularly. This adjustment,
however, should be left to a professional Yamaha service
technician.

Carburetor adjustment

The carburetor is a vital part of the engine. Adjusting should
be left to a Yamaha dealer who has the professional
knowledge, specialized data, and equipment to do so
properly. However, the following may be serviced by the
owner as part of routine maintenance.

The carburetor was set at Yamaha factory after many

tests. If the settings are changed, poor engine
performance and damage may result.

6-12

CAUTION:

Содержание YBR 125K




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды