Yamaha XT250L 2014, Руководство пользователя

Страница: 51 / 90

PERIODIC MAINTENANCE AND ADJUSTMENT
7-13
1
2
3
4
5
6
7
8
9
10
11
12
element.
TIP
Skip steps 6–8 if the oil filter element is
not being replaced.
6. Remove the oil filter element cover
by removing the bolts.
7. Remove and replace the oil filter
element and O-rings.
TIP
Make sure that the O-rings are properly
seated.
8. Install the oil filter element cover by
installing the bolts, and then tight-
en the bolts to the specified torque.
9. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
10. Install the oil filter element drain
bolt, and then tighten the bolt to the
1. Oil filter element drain bolt
1
1. Oil filter element cover bolt
2. Oil filter element cover
1
2
1. O-ring
2. Oil filter element
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
2
1
1
1YB-9-22.book 13 ページ ２０１４年２月２８日 金曜日 午前１０時２１分