Yamaha XT250L 2014, Руководство пользователя

Страница: 30 / 90

INSTRUMENT AND CONTROL FUNCTIONS
4-11
1
2
3
4
5
6
7
8
9
10
11
12
spring preload; the longer distance
A is, the lower the spring preload.
3. Tighten the locknut to the specified
torque. NOTICE: Always tighten
the locknut against the adjust-
ing ring, and then tighten the
locknut to the specified
torque.
[ECA10132]
WARNING
EWA10222
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.

Do not tamper with or attempt to
open the cylinder assembly.

Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.

Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.

Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
1. Locknut
2. Spring preload adjusting ring
1. Distance A
1
(b)
(a)
2
1
Spring preload:
Minimum (soft):
Distance A = 207 mm (8.15 in)
Standard:
Distance A = 197 mm (7.76 in)
Maximum (hard):
Distance A = 187 mm (7.36 in)
Tightening torque:
Locknut:
30 Nm (3.0 m·kgf, 22 ft·lbf)
1YB-9-22.book 11 ページ ２０１４年２月２８日 金曜日 午前１０時２１分