Periodic maintenance and adjustment
7-15
1
2
3
4
5
6
7
8
9
10
11
12
6. Install the oil filter element cover by
installing the bolts, and then tight-
en to the specified torque.
7. Install the engine oil drain bolt with
a new gasket, and then tighten the
bolt to the specified torque.
8. Pour the specified amount of the
recommended oil into the crank-
case.
TIP
Using a funnel is recommended.
9. After checking the engine oil filler
bolt O-ring, install the filler bolt.
TIP
Wipe off any spilled oil before starting
the engine.
10. Start the engine and let it idle for
several minutes while checking for
oil leaks. If any leakage is found,
immediately stop the engine and
check for the cause.
11. Turn the engine off, wait a few min-
utes for the oil level to settle, and
then check the oil level one last
time.
EAU85450
Why Yamalube
YAMALUBE oil is a Genuine YAMAHA
Part born of the engineers’ passion and
belief that engine oil is an important liq-
uid engine component. We form teams
of specialists in the fields of mechanical
engineering, chemistry, electronics and
track testing, and have them develop
the engine together with the oil it will
use. Yamalube oils take full advantage
of the base oil’s qualities and blend in
the ideal balance of additives to make
sure the final oil clears our performance
standards. Thus, Yamalube mineral,
semisynthetic and synthetic oils have
their own distinct characters and value.
Yamaha’s experience gained over
many years of research and develop-
ment into oil since the 1960’s helps
make Yamalube the best choice for
your Yamaha engine.
1. O-ring
2. Oil filter element
Tightening torque:
Oil filter element cover bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Tightening torque:
Engine oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
2
1
B1U-9-13_1.book 15 ページ ２０２２年４月７日 木曜日 午後３時１４分
