Instrument and control functions
4-5
1
2
3
4
5
6
7
8
9
10
11
12
Clock
The clock uses a 12-hour time system.
The clock shows the time even when
the vehicle is turned off.
To set the clock:
1. Push the “SELECT” button and
“RESET” button together for at
least two seconds.
2. When the hour digits start flashing,
push the “RESET” button to set the
hours.
3. Push the “SELECT” button, and
the minute digits will start flashing.
4. Push the “RESET” button to set
the minutes.
5. Push the “SELECT” button and
then release it to start the clock.
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If a problem is detected in any of those
circuits, the display will indicate an error
code.
If the display indicates such an error
code, note the code number, and then
have a Yamaha dealer check the vehi-
cle.
NOTICE
ECA11591
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
EAU1234M
Handlebar switches
Left
Right
1. Error code display
1
1. Dimmer switch “
/
”
2. Turn signal switch “
/
”
3. Horn switch “
”
1. Engine stop switch “
/
”
2. Start switch “
”
1
2
3
2
1
B1U-9-13_1.book 5 ページ ２０２２年４月７日 木曜日 午後３時１４分
