manualshive.com logo in svg

Yamaha XT225V, Руководство пользователя, Страница: 74 / 97

Поделиться
Скачать
Yamaha XT225V Скачать руководство пользователя страница 74

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-38

 

1

2

3

4

5

6

7

8

9

 

3. Insert the wheel axle, and then in-

stall the axle nut.

4. Lower the front wheel so that it is

on the ground.

5. Tighten the axle nut to the speci-

fied torque.

6. Connect the speedometer cable,

and then install the speedometer
cable holder by installing the
screw.

7. Install the brake disc cover by in-

stalling the screws.

8. Install the engine guard by install-

ing the bolt.

 

EAU25080

 

Rear wheel 

 

EAU25470

 

To remove the rear wheel

WARNING

 

EWA10820

 

●

 

It is advisable to have a Yamaha
dealer service the wheel.

 

●

 

Securely support the motorcy-
cle so that there is no danger of

 

it falling over.

 

1. Remove the engine guard by re-

moving the bolt.

2. Remove the brake pedal free play

adjusting nut, and then disconnect

 

1. Retainer

 

Tightening torque:

 

Axle nut:

85 Nm (8.5 m·kgf, 62 ft·lbf)

1

 

1. Engine guard
2. Bolt

2

1

Содержание XT225V


































































































Отзывы:

Нет отзывов