manualshive.com logo in svg

Yamaha XT225V, Руководство пользователя, Страница: 50 / 97

Поделиться
Скачать
Yamaha XT225V Скачать руководство пользователя страница 50

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-14

 

1

2

3

4

5

6

7

8

9

higher.

 

●

 

Make sure that no foreign mate-

 

rial enters the crankcase.

 

14. Start the engine, and then let it idle

for several minutes while checking
it for oil leakage. If oil is leaking, im-
mediately turn the engine off and
check for the cause.

15. Turn the engine off, and then

check the oil level and correct it if
necessary.

16. Install the engine guard by install-

ing the bolt.

 

EAU20840

 

Cleaning the air filter element 

 

The air filter element should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Clean the air filter element more fre-
quently if you are riding in unusually
wet or dusty areas.

1. Remove panel A. (See page 6-8.)
2. Remove the air filter case cover by

removing the screws.

3. Pull the air filter element out from

the air filter case.

4. Remove the sponge material from

the air filter element frame.

5. Clean the sponge material with

solvent, and then squeeze the re-
maining solvent out.

 

1. Air filter case cover
2. Screw

1

2

 

1. Air filter element

1. Sponge material
2. Air filter element frame

1

1

2

Содержание XT225V


































































































Отзывы:

Нет отзывов