manualshive.com logo in svg

Yamaha XT225V, Руководство пользователя, Страница: 45 / 97

Поделиться
Скачать
Yamaha XT225V Скачать руководство пользователя страница 45

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-9

 

2

3

4

5

6

7

8

9

 

To install the panel
Place the panel in the original position,
and then install the screw.

 

EAU19602

 

Checking the spark plug 

 

The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked
in accordance with the periodic mainte-
nance and lubrication chart. In addition,
the condition of the spark plug can re-
veal the condition of the engine.

 

To remove the spark plug

 

1. Remove the spark plug cap.

2. Remove the spark plug as shown,

with the spark plug wrench includ-
ed in the owner’s tool kit.

 

To check the spark plug

 

1. Check that the porcelain insulator

around the center electrode of the
spark plug is a medium-to-light tan
(the ideal color when the vehicle is
ridden normally).

NOTE:

 

If the spark plug shows a distinctly dif-
ferent color, the engine could be defec-
tive. Do not attempt to diagnose such
problems yourself. Instead, have a

 

Yamaha dealer check the vehicle.

2. Check the spark plug for electrode

erosion and excessive carbon or
other deposits, and replace it if
necessary.

 

1. Panel B
2. Screw

1

2

 

1. Spark plug cap

1

 

1. Spark plug wrench

1

Содержание XT225V


































































































Отзывы:

Нет отзывов