manualshive.com logo in svg

Yamaha XT225V, Руководство пользователя, Страница: 70 / 97

Поделиться
Скачать
Yamaha XT225V Скачать руководство пользователя страница 70

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-34

 

1

2

3

4

5

6

7

8

9

 

4. Remove the headlight bulb holder

by turning it counterclockwise, and
then remove the defective bulb.

WARNING

 

EWA10790

 

Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled

 

down.

 

5. Place a new bulb into position, and

then secure it with the bulb holder.

CAUTION:

 

 ECA10660

 

Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt

and fingerprints on the headlight
bulb using a cloth moistened with al-

 

cohol or thinner.

 

6. Install the bulb cover, and then

connect the coupler.

7. Install the headlight unit by install-

ing the bolts.

8. Install the cowling.
9. Have a Yamaha dealer adjust the

headlight beam if necessary.

 

1. Headlight coupler
2. Headlight bulb cover

1

2

 

1. Headlight bulb holder

1

 

1. Do not touch the glass part of the bulb.

1

Содержание XT225V


































































































Отзывы:

Нет отзывов