Yamaha xt 125 Скачать руководство пользователя

Страница: 77 / 97

6-30

This shock absorber contains highly pressurized

nitrogen gas. Read and understand the following

information before handling the shock absorber. The

manufacturer cannot be held responsible for property

damage or personal injury that may result from improper

handling.

Do not tamper with or attempt to open the cylinder

assembly.

Do not subject the shock absorber to an open flame

or other high heat source. This may cause the unit

to explode due to excessive gas pressure.

Do not deform or damage the cylinder in any way.

Cylinder damage will result in poor damping

performance.

Take your shock absorber to a Yamaha dealer for

any service.

Rear shock absorber adjustment

The spring prelod of the rear shock absorber can be adjusted

to suit rider’s preference, weight and course condition.

Turn the adjusting ring in direction

to increase spring

preload and in direction

to decrease spring preload. Make

sure that the appropriate notch in the adjusting ring is aligned

with the position indicator on the rear shock absorber.

1. Spring preload adjusting ring

2.Position indicator

WARNING:

ADJUSTING

POSITION

SOFT

STANDARD

HARD

This shock absorber contains highly pressurized

nitrogen gas. Read and understand the following

information before handling the shock absorber. The

manufacturer cannot be held responsible for property

damage or personal injury that may result from improper

handling.

Do not tamper with or attempt to open the cylinder

assembly.

Do not subject the shock absorber to an open flame

or other high heat source. This may cause the unit

to explode due to excessive gas pressure.

Do not deform or damage the cylinder in any way.

Cylinder damage will result in poor damping

performance.

Take your shock absorber to a Yamaha dealer for

any service.

Rear shock absorber adjustment

The spring prelod of the rear shock absorber can be adjusted

to suit rider’s preference, weight and course condition.

Turn the adjusting ring in direction

to increase spring

preload and in direction

to decrease spring preload. Make

sure that the appropriate notch in the adjusting ring is aligned

with the position indicator on the rear shock absorber.

1. Spring preload adjusting ring

2.Position indicator

WARNING:

ADJUSTING

POSITION

SOFT

STANDARD

HARD

Содержание xt 125


































































































Результаты поиска

Содержание xt 125

Отзывы:

Похожие инструкции для xt 125

Бренды по названию

Популярные бренды

Yamaha xt 125, Руководство пользователя

Результаты поиска

Содержание xt 125

Отзывы:

Похожие инструкции для xt 125

Бренды по названию

Популярные бренды