Yamaha xt 125 Скачать руководство пользователя

Страница: 36 / 97

4-6

Proper loading of your motorcycle is important for the

handling, braking, and other performance and safety

characteristics of your motorcyle. Do not carry loosely

packed items that can shift. Securely pack your heaviest

items close to the center of the motorcycle, and

distribute the weight evenly from side to side. Properly

adjust the suspension for your load, and check the

condition and pressure of your tires. NEVER

OVERLOAD YOUR MOTORCYCLE. Make sure the total

weight of the cargo, rider, passenger, and accessories

(fairing, saddlebags, etc. if approved for this model)

does not exceed the maximum load of the motorcycle.

Operation of an overloaded motorcycle could cause tire

damage, an accident, or even injury.

Tire inspection

Always check the tires before operating the motorcycle.

If a tire tread shows crosswise lines (minimum tread

depth), if the tire has a nail or glass fragments in it, or if

the side wall is cracked, contact a Yamaha dealer or

other qualified mechanic and have the tire replaced.

1.Tread depth

2. Side wall

3. wear indicator

WARNING:

Proper loading of your motorcycle is important for the

handling, braking, and other performance and safety

characteristics of your motorcyle. Do not carry loosely

packed items that can shift. Securely pack your heaviest

items close to the center of the motorcycle, and

distribute the weight evenly from side to side. Properly

adjust the suspension for your load, and check the

condition and pressure of your tires. NEVER

OVERLOAD YOUR MOTORCYCLE. Make sure the total

weight of the cargo, rider, passenger, and accessories

(fairing, saddlebags, etc. if approved for this model)

does not exceed the maximum load of the motorcycle.

Operation of an overloaded motorcycle could cause tire

damage, an accident, or even injury.

Tire inspection

Always check the tires before operating the motorcycle.

If a tire tread shows crosswise lines (minimum tread

depth), if the tire has a nail or glass fragments in it, or if

the side wall is cracked, contact a Yamaha dealer or

other qualified mechanic and have the tire replaced.

1.Tread depth

2. Side wall

3. wear indicator

WARNING:

Содержание xt 125


































































































Результаты поиска

Содержание xt 125

Отзывы:

Похожие инструкции для xt 125

Бренды по названию

Популярные бренды

Yamaha xt 125, Руководство пользователя

Результаты поиска

Содержание xt 125

Отзывы:

Похожие инструкции для xt 125

Бренды по названию

Популярные бренды