Perio
d
ic maintenance an
d
a
d
justment
8-33
8
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the plate and bolts.
EAU60701
Trou
b
leshootin
g
Although Yamaha vehicles receive a
thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your vehicle re-
quire any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the vehicle prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
EWA15142
When checkin
g
the fuel system,
d
o
not smoke, an
d
make sure there are
no open flames or sparks in the ar-
ea, inclu
d
in
g
pilot li
g
hts from water
heaters or furnaces. Gasoline or
g
asoline vapors can i
g
nite or ex-
plo
d
e, causin
g
severe injury or prop-
erty
d
ama
g
e.
EAU76551
Smart key system trou
b
leshootin
g
Please check the following items when
the smart key system does not work.
Is the smart key turned on? (See
page 4-5.)
Is the smart key battery dis-
charged? (See page 4-6.)
Is the smart key battery installed
correctly? (See page 4-6.)
Is the smart key being used in a lo-
cation with strong radio waves or
other electromagnetic noise? (See
page 4-1.)
Are you using the smart key that is
registered to the vehicle?
Is the vehicle battery discharged?
When the vehicle battery is dis-
charged, the smart key system will
not operate. Please have the vehi-
cle battery charged or replaced.
(See page 8-28.)
1. License plate light bulb
1
UB5X10E0.book Page 33 Thursday, May 27, 2021 8:55 AM