Smart key system
4-6
4
2. Turn the main switch to “OFF”,
and then push the main switch
knob once.
3. Within 9 seconds of pushing the
knob, push and hold the knob
again for 5 seconds.
4. When the beeper sounds, the set-
ting is complete.
If the beeper:
Sounds twice: The beeper is
turned off.
Sounds once: The beeper is
turned on.
EAU83293
Smart key
b
attery
If the smart key system indicator light
flashes for 20 seconds when the vehi-
cle is first turned on, the smart key bat-
tery is low and should be replaced.
Also, if the answer-back function does
not work or its operating range is very
short, replace the battery soon.
WARNING
EWA14724
The
b
attery an
d
other remov-
a
b
le parts may cause injury if
swallowe
d
. Keep the
b
attery
an
d
other remova
b
le parts away
from chil
d
ren.
Do not expose the
b
attery to
d
i-
rect sunli
g
ht or other heat
sources.
To replace the smart key
b
attery
1. Open the smart key case as
shown.
2. Remove the battery.
1. Smart key system indicator light “
”
1
1. Battery
1
UB5X10E0.book Page 6 Thursday, May 27, 2021 8:55 AM