Instrument an
d
control functions
5-7
5
While the V-belt replacement tripmeter
is flashing, hold the “TRIP” switch for
15 to 20 seconds. Release the “TRIP”
switch, and the V-belt trip value will re-
set to zero.
TIP
If the V-belt is replaced before the V-
belt replacement indicator comes on
(i.e., before the periodic V-belt replace-
ment interval has been reached), the V-
belt replacement tripmeter must be re-
set for the V-belt replacement indicator
to come on at the correct time.
Information
d
isplay
The information display is equipped
with the following displays:
Air temperature “Air-temp”
Battery voltage “Battery”
Traction control system “TCS ON”
or “TCSOFF”
Average fuel consumption “Con-
su Average km/L” or
“Consu Average L/100
km” or “Consu Average
MPG”
Instantaneous fuel consumption
“Consumption km/L” or “Con-
sumption L/100 km” or “Con-
sumption MPG”
Average speed “Average”
Warning message function
Use the “INFO” switch to cycle be-
tween the displays in the following or-
der:
Air-temp
→
Battery
→
TCS ON or TC-
SOFF
→
Consu Average km/L
→
Consu Average L/100 km
→
Consu Average MPG
→
Consumption km/L
→
Consumption
L/100 km
→
Consumption MPG
→
Av-
erage
→
Air-temp
TIP
When kilometers are selected as
the display units, “Consu
Average MPG” and “Consump-
tion MPG” are not displayed.
When miles are selected for the
display units, “Consu Av-
erage km/L”, “Consu Av-
erage L/100 km”, “Consumption
km/L”, and “Consumption L/100
km” are not displayed.
Air temperature
d
isplay
This display shows the air temperature
from 14 °F to 122 °F in 1 °F increments.
1. Information display
1
1. Air temperature display
2. Icy road warning indicator “
”
1
2
UB5X10E0.book Page 7 Thursday, May 27, 2021 8:55 AM