Yamaha WR250F(R), Инструкция по сборке

Страница: 16 / 34

-10-
EAA00039*
13. HANDLEBAR CLAMP
A: Secure the left handlebar
switch lead with a cableclamp.
B: Secure the right handlebar
switch lead with a cableclamp.
NOTE:
Refer to “CABLE ROUTING”.
EAA00209*
14. CABLE CLAMP
A: Clamp the hot starter (choke)
cable and clutch cable.
NOTE:
Refer to "CABLE ROUTING".
1 Cable clamp 1 V
EAA00071*
15. FUEL TANK BREATHER
HOSE
A: Install the steering shaft cap
to the fuel tank breather hose.
B: Connect one end of the
breather hose to the fuel tank
filler cap, and insert the other
end into the hole of the steer-
ing shaft.
NOTE:
Refer to "CABLE ROUTING".
CAUTION:
Install the hose joint with its
arrow mark facing the TANK
side.
1 Steering shaft cap 1 V
2 Fuel tank breather hose 1 V
1 Handlebar clamp 4 V