Yamaha WaveRunner FX Cruiser SHO, Руководство по обслуживанию

Страница: 49 / 433

1-44
E
GEN
INFO
1
2
3
4
5
6
7
8
9
No-wake mode control
The no-wake mode has been added as a new function. The no-wake mode is a function for operat-
ing the watercraft at a low speed to limit the watercraft's wake. In this mode, the ECM automatically
maintains the engine speed at approximately 2,100 r/min. When the no-wake mode is activated,
“ 5 ”
(when miles are selected) or “ 8 ” (when kilometers are selected) starts flashing in the digital speed-
ometer display to inform the rider that the mode has been activated. The no-wake mode cannot be
activated immediately after starting the engine. After starting the engine, wait for 5 seconds or more
before activating the mode.
To activate the no-wake mode:
Push and hold the
“ NO-WAKE MODE ” switch. When the no-wake mode is activated, the beeper
sounds 3 times quickly and “ 5 ” (when miles are selected) or “ 8 ” (when kilometers are selected)
starts flashing in the digital speedometer display. Keep the throttle lever in the idle position when the
no-wake mode is activated.
To deactivate the no-wake mode:
Perform one of the following procedures to deactivate the no-wake mode.
• Push the “ NO-WAKE MODE ” switch.
• Squeeze the throttle lever.
• Move the shift lever to the reverse position.
• Stop the engine.
The beeper sounds 2 times quickly and the digital speedometer display stops flashing when the no-
wake mode is deactivated.
1
“ NO-WAKE MODE ” switch
Number of
beeps
No-wake mode operation
Digital speedometer
display
Activated Starts flashing
Deactivated Stops flashing
1
Technical tips